CH3 GANS

De la Keshe Foundation Wiki ro
This is the approved revision of this page, as well as being the most recent.
Salt la: navigare, căutare
Schematic setting of CH3-production without current; instead of the shortcut you can also use DC of a battery

Production

CH3 GANS is produced by using an zinccoated iron plate (or coil) in combination with a nano-coated copper coil or plate. The two metals are connected together with a copper wire. Unlike the production of CO2 GANS, you can use a very small amount of DC current and a fish tank pump (aerator) to speed the production process, but the pump is not mandatory. At first, there will be a reaction between zinc and nanocoated copper, after a while, the reaction between iron and nanocoated copper starts. You can use a common, adjustable DC device, which produces current of approximately 15 mA between the two metal plates instead of the connection of a copper wire. If you do, the negative pole of the device is attached to the nano-coated copper coil or plate and the positive pole of the device is connected to the iron. You could also use a 1.5 V battery as power source. If you use any kind of current you should aerate the salt solution with a small fish tank pump. It will only take a few hours to produce a reddish brown layer of CH3 GANS at the bottom of the container. To get a better result, you can mount a coil of a PC fan between the two plates instead of a wire or a current source. (CAUTION: never touch GANS with any part of the body).

Required Materials:

  • Plastic Container
  • Zinccoated iron plate or wire (e.g. chicken mesh)
  • Nano-coated copper coil or plate
  • 100 grams of sea salt
  • 1 litre of distilled water
  • Optional: DC-Device and fish tank aerator

CH3 GANS Uses/Application

CH3 GANS water will strongly energize the body and is nutritious. For instance, 8 drops of CH3 GANS water combined with 1 drop of ZnO GANS water and 1 drop of CO2 GANS water will yield the following results: The plasmatic fields of CH3 GANS water gives energy to the body while the plasmatic fields of the ZnO GANS water support the nervous system. The plasmatic fields of the CO2 GANS water acts on muscles and the nervous system. The carbon within CH3 and CO2 GANS waters release energy while the hydrogen of the CH3 GANS water and the oxygen of CO2 GANS water combine to provide moisture, which is needed in the body. The energy of the hydrogen of the CH3 GANS water becomes food for the body. The ZnO GANS water supports nerve connections that are needed to assimilate energy into the body. To assure the application is effective, always add one drop of amino acid of each type of GANS to your drop mixture. The amino acid builds up on the top of the salt water solution during the production of each of the GANS' (see Amino Acids).

Every time you want to apply CH3 GANS liquid as food you must add amino acids. The amino acids tell the body that the energy is provided for the body. The GANS and the amino acids are created within the same container and therefore have an inner connection regarding their inner structure. This inner connection is necessary for the fields of the GANS and its information, which are available within the GANS water and the liquid plasma, to be transferred to the molecules of the cells of a living body. Procedures are topics of present and future research. CH3 GANS is also necessary for technical energy production.